HP 610/30.5/Removable Adhesive Fabric, 24", 8SU04A, 289 g/m2, plátno, 610 mm x 30.5 m, biele, pre atramentové tlačiarne, rolky

Ink compatibility

Compatible with HP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex Inks

Core size

3-in core with a removable 2-in adapter

Weight (With liner)

289 g/m? per ISO 536 Test Method

Thickness (With liner)

304 microns/12 mil per ISO 20534 Test Method

Liner

120 g/m?, double-sided PE-coated silicone paper

Adhesive

Clear, removable, and repositionable adhesive

Removability

Up to 3 years removable/repositionable indoors

Opacity

Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method

Brightness

Greater than 87% per Tappi-T452 Test Method

Whiteness

118 per ASTM E313-98 Test Method

Finish

Matte

Slip rating

Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)⁴

Operating temperature

15 to 25° C / 59 to 77° F

Operating humidity

20-80% RH

Water resistance

Moderately water-resistant3

Wind orientation

Print side out

Dry time

Immediate

Flame resistance

Class A, ASTM E842

Lamination

For additional protection, liquid or spray coatings are recommended

PageWide cutter

The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter

Shelf life

1 year, unopened in original packaging

Storage temperature

10 to 27° C / 50 to 80° F

Storage humidity

35 to 65% RH

Environmental

REACH compliant1

Finishing/post-processing

Use a carbide knife for kiss and die-cutting

Installation tip

To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.

Country of origin

Product of China and Malaysia